Avoid the repeater channels as well as channel 11 (trucking channel) , 15 (am emergency call channel) and 24 (common for Caravan clubs)

Battery The Fire Control Unit can be powered from battery packs between 7.4v and 10.8v. This includes common airsoft battery packs as well as small (<300mAh) lithium polymer packs. 7.4v and 8.4v battery packs are recommended since there are no benefits to using a higher voltage. Alkaline batteries (including 9V batteries) should not be used as they do not meet the minimum continuous current rating of at least 1A and will lead to malfunction.

THE FCU WILL CONTINUE TO DRAW POWER FOR AS LONG AS THE BATTERY REMAINS CONNECTED. ALWAYS DISCONNECT THE BATTERY AFTER USE TO PEREVENT THE BATTERY FROM DISCHARGING COMPLETELY.

Programming

To enter programming mode, press inward on the programming button. The display will show the firmware revision (e.g. rE 3.0) and the programming indicator will turn on. When the programming indicator is on the trigger is disabled and the system is in programming mode. Press the programmin…